We have a reliability target for our system. But we're not meeting it.
To avoid this scenario, what is something we can do in early development?
When we're figuring out our concept, we can better learn about our options. We can work with Reliability Engineers to understand what we know, the risk in what we don't know, and to prioritize reliability of the modules to be able to meet the reliability of our whole system.
We talk about using reliability allocation to help us choose reliability goals for modules of our product design.
There is much more on the podcast blog: graphics, lists, and extra links. Be sure to visit it at the website!
**NEW COURSE** FMEA in Practice: from Plan to Risk-Based Decision Making is enrolling students now. Visit the course page for more information and to sign up today! Click Here
**FREE RESOURCES** Quality during Design engineering and new product development is actionable. It's also a mindset. Subscribe for consistency, inspiration, and ideas at www.qualityduringdesign.com.
About me Dianna Deeney helps product designers work with their cross-functional team to reduce concept design time and increase product success, using quality and reliability methods.
She consults with businesses to incorporate quality within their product development processes. She also coaches individuals in using Quality during Design for their projects.
She founded Quality during Design through her company Deeney Enterprises, LLC. Her vision is a world of products that are easy to use, dependable, and safe – possible by using Quality during Design engineering and product development.
Speaker 1:
We're testing the reliability of our system and it's not meeting our goals. We may need to revisit how we set up our reliability goals of our modules, the things that we combine together to make up our system. Let's talk more about reliability allocation after this brief introduction. Hello and welcome to Quality During Design, the place to use quality thinking to create products, others love for less. Each week we talk about ways to use quality during design, engineering, and product development. My name is Diana Dean. I'm a senior level quality, professional, and engineer with over 20 years of experience in manufacturing and design. Listen in and then join us. Visit quality during design.com. Do you know what 12 things you should have before a design concept makes it to the engineering drawing board where you're setting specifications. I've got a free checklist for you and you can do some assessments of your own. Where do you stack up with the checklist? You can log into a learning portal to access the checklist and an introduction to more information about how to get those 12 things. To get this free information, just sign up@qualityduringdesign.com. On the homepage, there's a link in the middle of the page. Just click it and say, I want it. I have heard this kind of a story from multiple reliability engineers about different projects being done in different companies. A reliability target was set for a system to be, let's say 90%, so we have a system reliability target of 90%. The team decided to design and test their modules to the same level of reliability, a 90% reliability goal. When the whole system got put together, it didn't meet that goal. It was much less than the 90% goal. What happened? Well, reliability is a probability and probabilities don't add up that way. If we have a system reliability of 90%, then at least some of our modules need to be designed to a higher level reliability. Not all of them need to be higher than 90%, but at least one, maybe two of them. It depends. What we really wanna look for is to find a combination of liabilities of our modules that fit within what's capable in terms of our costs, our timeline, and honestly our technical capability. Sometimes there's not a whole lot that we can do to improve the reliability of something. Knowing all of this helps us to reach our system reliability goal, we can look at the performance of the module itself, but then also look at how things are assembled as part of the system. Do we need any redundancies to meet our target reliability? Analyzing information and making proposals about certain module requirements in order to meet a system goal is called reliability allocation, so where do we focus our efforts? Which modules do we choose to have a greater reliability and that requires us to know a bit about the reliability of the modules themselves and our reliability. Engineering friends can help us through this. The first thing that comes to mind when trying to understand the reliability of something is through its testing. We design a test specifically for our use case and we develop reliability models from it. We may not be able to test everything for, for one. We're likely working at the concept phase of development cuz we're setting our reliability requirements and we don't have units to test. There are other options we have with our reliability engineers. Just by applying our engineering knowledge and looking at our system as a set of different modules, we can start to understand where we have gaps, where we may need to run a few tests or talk with a supplier about any kind of reliability data they may have generated or how they test their product. We can start researching other similar products we have and see if we have reliability data of those products and understand the differences that we're looking to make with our design and how that affects the relevance of our data to our new use case. We can choose to focus on certain modules to understand the reliability better, what is new, what is different, or what has been a problem in the past. Another way to help us choose where to focus is based on risk from our failure mode effects analysis. This is a subjective measure, especially in early concept development, but we can consider it as a starting point. If the failure of one module leads to many failure events, then that's an indication that we wanna take a closer look at that module's reliability. If the failure of one module leads to a system failure, then we'll want to look at that. Also, all of this sort of research, learning more about our product, how it's set up in its architecture with modules, finding data and looking at risk information that we may need to help us assess reliability of the system. Like many other aspects of design in the early phases of development, we're not going to have a lot of data, but we start with what we know and then iterate on it throughout the development process. Updating things as we learn more about our product and being intentional about what it is we want to test and learn. Any early reliability work isn't going to be highly accurate. We may not be able to develop it with a high level of confidence. We can use it as a basis for comparing options and highlighting the features of a design that should have a critical level of reliability. Once we do have reliability data, there are some software solutions that reliability engineers can use to help them calculate things like the probability of a module to cause a system failure. They can create a reliability block diagram which assembles the components by its logic order and can assess how different reliability could affect the entire system. Reliability, reliability engineers can also look at the costs associated with increasing the reliability of modules, and a last note is at the lower the level of the individual parts compared to the whole system, the greater the uncertainty we have in being able to predict the reliability of it. When we are doing reliability allocation, we wanna look at the modules or subsystems. Individual components are generally reliable based on their limited function and also today's manufacturing and design standards. When we add that component with others to make a system, our system reliability isn't as high, and that's because in our greater system there's a lot of interactions and actions and different components having an effect on the whole system performance. If you're interested in learning more about how to do reliability allocation in more detail and how it fits into the broader design development process, I recommend an article series authored by Chris Jackson with the titles. Three Ways to Do Reliability Allocation. It's a five part article series and I'll include links to it on the podcast blog. What's today's insight to action? At the start of this episode, we talked about trying to meet a system reliability goal and what that means for our different modules that are going to be making up our system with what reliability targets do we need to design those modules for. We can use the help of reliability engineers through reliability allocation to help us better understand this. They can help us assess where we should be designing for reliability improvements. We can work with them to understand where we have knowledge gaps and where risks may be through them. We can also understand how changing probabilities of failure of subsystems or modules can affect our overall system reliability goals. With all of this, we'll be able to direct our attention to where it needs to be and we'll be able to plan for a future testing further in the development process. Ultimately, reliability engineers can help us better understand where we need to focus for great designs. If you like this topic or the content in this episode, there's much more on our website including information about how to join our signature coaching program. The quality during design journey consistency is important, so subscribe to the weekly newsletter. This has been a production of Deanie Enterprises. Thanks for listening.