The Prosthetics and Orthotics Podcast
The Prosthetics and Orthotics Podcast is a deep dive into what 3D printing and Additive Manufacturing mean for prosthetics and orthotics. We’re Brent and Joris both passionate about 3D printing and Additive Manufacturing. We’re on a journey together to explore the digitization of prostheses and orthoses together. Join us! Have a question, suggestion or guest for us? Reach out. Or have a listen to the podcast here. The Prosthetic and Orthotic field is experiencing a revolution where manufacturing is being digitized. 3D scanning, CAD software, machine learning, automation software, apps, the internet, new materials and Additive Manufacturing are all impactful in and of themselves. These developments are now, in concert, collectively reshaping orthotics and prosthetics right now. We want to be on the cutting edge of these developments and understand them as they happen. We’ve decided to do a podcast to learn, understand and explore the revolution in prosthetics and orthotics.
The Prosthetics and Orthotics Podcast
Data-Driven Prosthetic Socket Fit with Matt Wernke, PhD
Use Left/Right to seek, Home/End to jump to start or end. Hold shift to jump forward or backward.
Socket comfort is still the problem that won’t go away, and “good hands” can only take you so far when patients need consistency, speed, and healthier tissue loading. We sit down with Matt Wernke, Director of Research and Development at WillowWood, to talk about what changes when prosthetic socket design becomes measurable and repeatable instead of mostly interpretive.
Matt walks us through the real origin story: a Department of Defense funded clinical trial built to answer a blunt question, how should we distribute pressure on a residual limb in a way that protects skin health and reduces tissue injury? That research led to TIG, a handheld tool designed to quantify tissue stiffness, basically turning what clinicians already feel during palpation into data that can be used in a digital workflow. We talk outcomes, iteration, and why proving what you deliver matters as much as the design you intended.
From there we get into the modern workflow: TIG measurements feeding into WillowWood’s revamped Omega platform, AI-assisted mapping of measurement sites onto a scan, and a socket recommendation the clinician can verify and personalize. We also dig into the practical benefits clinics actually care about, fewer disruptions for patients, stronger documentation over time, and the long-term roadmap of monitoring fit changes and even automatic adjustment at the interface. Along the way, we touch on how WillowWood uses 3D printing for prototyping, components, fixtures, and safety, plus a candid look at adoption and the fear of “replacing” craft instead of enhancing it.
Special thanks to Advanced 3D for sponsoring this episode.
Carbon Fiber Polypropylene Breakthrough
SPEAKER_02Okay, cool. Hello everyone. My name is Joris Peels, and this is another prosthetics and Orthotics podcast with Brent Wright. How are you doing, Brent?
SPEAKER_01Hey man. I'm uh doing well. You know, it's it's been interesting. We're a couple weeks after the AOPA and everybody now now it's like people are kind of looking into, hey, what did we see and who do we want to contact? And so Advanced 3D is getting a lot of calls, which is super cool. But we're already almost sold out of our polypropylene carbon fiber, the carbon flow. I've already placed another order for triple as much.
unknownOkay.
SPEAKER_02Wine's not so popular. Why is it so popular?
SPEAKER_01So so polypropylene is notoriously hard to print. It's called polywarpylene for a reason.
SPEAKER_02I hadn't heard that actually. That's really funny.
SPEAKER_01And you know, it doesn't stick to a bed, it doesn't anything. And so and you you're usually at a high temperature, usually some sort of heated chamber, just to get anything close. Well, our polypropylene actually melts at 240 degrees. Uh see? So a little bit less. It's uh it's got a lot of carbon fiber in it. And then there's uh the X, Y, and Z are all the same strength. Okay. And uh and it sticks to the bed really nice. No, no, like really the same strength. So yeah. I'm still skeptical, but I'll get it. Yeah, well, you know, uh we'll talk to talk to we need to get safe on sometime, uh, our engineer guy. He he is like super duper on the he'll so he'll run samples in the XY and then one in Z and and break them on our uh tensile tester. And it's it's been pretty incredible. So anyway, it it it really doesn't fail, which is pretty cool, and it's great for prosthetics. So, you know, for me, especially with the stuff that I um do in the developing world and and hope that other people will do in the developing world, I believe that this is part of the answer that we've been looking for for nice, durable, accessible prostheses uh worldwide. So I'm really excited about that.
unknownCool.
SPEAKER_02And do you sell the material or just the services or what?
SPEAKER_01We sell the material, yep.
unknownYep.
SPEAKER_01No, come on, come on. And it's uh 1.75, so that's the first kind of 1.75 material for in specifically for prosthetics and orthotics that's polypropylene carbon five.
SPEAKER_02I knew you can't you were just like talking about it, so I didn't know you guys were sign. That's awesome, dude.
SPEAKER_01Yeah. Well, you know, it's one of those things. It's like if if if what's out there doesn't make you happy, I guess you gotta go try to figure out how to make it yourself. Totally, dude. Totally. Even though you say, hey man, never buy a machine, don't produce anything.
SPEAKER_02Yeah. Do you do parts and help people in design journeys to parts? I'm more about that. I'm more about the value of the services around there. Material selling materials is a beautiful business if you have the right material stuff. So you know, the servicing is the thing I think is just really complicated and really a lot of work.
SPEAKER_01Well, and I think I want you just real quick, you've done a a series of posts and you call it your Franken Frankenstein service. Frankenservice. I mean, you describe advanced 3D pretty much to the T, like we have all the different machines going and stuff, but it's it's actually for us, it works, but I can definitely see at a large scale, you're gonna need very much the same machines. And we're moving in that direction, but each machine does serve its different purpose.
SPEAKER_02Yeah, I think I think the idea behind the Franken Service series of posts is this everyone always tends to standardize on one machine because we're a bit scared, right? And they also kind of standardize on one material. That's why we have a lot of uh, you know, whatever P110s or for soons flights with like, you know, uh P12 essentially. A lot of people just, you know, they buy a fuse and then they just buy more of them, you know, and then they don't go to anything else. And the idea was that, you know, maybe it's better to have more complicated workflows and be more of a uh you know, ideated part provider in many more different, you know, to use the the idea was to use, for example, uh the the fuses for long weekend runs, right? And then the 1200 smaller HP machines for small niche materials. And then, for example, have like a you know, maybe like a fursuit flight for some kind of FR censoring material that no one else uses but but is still makes sense on that machine, you know, that kind of thing. So and people don't tend to use, they they tend to stick like to what they know, and I think I think it's just an interesting thought experiment to look at, like, you know, what what you know what what else we could be thinking
Why One Machine Is Not Enough
SPEAKER_02about, you know. So that's cool. Hey, do we have a guest today?
SPEAKER_01We do, we do. I'm really excited to have Matt Wernkey on. Uh, he's the director of research and development at Willowwood. And we talked to his colleague, uh uh Janine, talking about the socket design thing, and we won't steal all the all the thunder yet, but uh he has been working with her and doing some of that, and uh, and we've talked back and forth, and we actually gave them best of show, not only the the booth, but also for the product itself uh on the last episode. So I'm really excited to have him on, not only to talk about his journey, but also to talk about some of the new products coming down the line to enhance prosthetic fit.
SPEAKER_00Awesome.
SPEAKER_02So uh Matt, welcome to the show.
SPEAKER_00Yeah, thank you for having me. And it was a great honor to get that best of show and uh best booth. So really appreciate that, guys.
SPEAKER_02So talk to well, tell us a little bit how did you get involved with
Matt Wernkey’s Path Into O and P
SPEAKER_02OMP?
SPEAKER_00Yeah, you know, I was always growing up into athletics, building ramps, stairs, you know, maybe borrowing wood from houses that were being constructed in my neighborhood and just just building things with my friends. And my high school had engineering tech courses as an elective, and so I took those because I was really interested in engineering. And one day on the way out the door to school, my dad gave me a article about prosthetic limbs. And since that day, it's just this is what I wanted to do, and so kind of picked my uh engineering degree through college and then uh grad school focused on on OMP. My dissertation was on upper limb prosthetics, and about that time I was defending one of my committee members and mentors, Jason Highsmith, had an email from Willowwood that they were looking for a new research engineer and applied and you know the rest is history. Here I am 13 years later now.
SPEAKER_02Okay, cool. And and talk to us about research engineering, because that's not, you know, mechanical engineer, sure I've heard of it. What does a research engineer do? Because I think it's a really interesting job, actually, right?
SPEAKER_00It is. It's uh it's a it's a great role. I I think uh it's been a really rewarding career. It's opened up a lot of doors. So it you know, originally it was brought on to help lead some of the grant efforts that they had, really looking at outcomes. So one of the core tenets of Willowwood is creating outcomes for patients, for clinicians, and improving the lives, leveling the playing field. And yeah, that that was the goal is not just make product, but also provide the outcomes and show that what we say this thing does is actually what it what it does do. And so that it created a lot of opportunity. And through that time, the the role evolved and took on more emphasis on development at times, more emphasis on research and kind of trying to get ahead of where trends are going in the in the industry. And it's a really fun and challenging role.
SPEAKER_02Okay, that's cool. And then uh, well, talk to us first about this new solution you guys have been developing because uh we we we talked about it a little bit with the colleague, but it seems like really
The Clinical Trial Behind TIG
SPEAKER_02interesting. It it seems like what what was the problem you guys were originally trying to solve?
SPEAKER_00Yeah, so we've been working on this since I want to say 2019 or so. We wrote the original grant that was funded by the Department of Defense. And really, the the project that we were trying to get funded at the time is we were really interested in how should sockets be designed. We know comfort is one of the main concerns of patients. We know that there's still a high prevalence of tissue injury, skin irritation that's being reported. So we wanted to understand how should we distribute pressure on the limb in a way that is healthy for the tissues. And, you know, kind of leading into this, we had been in a we've been in a 15 plus year collaboration with Ohio State University and some of their wound care experts there. So we've developed this expertise for how to measure limb health and selecting limb health measurements that predict uh wound formation. And so we use that expertise and built this study, this clinical trial, to measure how skin health responds and re in in in in response to tissue and socket design. But one variable I wanted to control in the study was, you know, we Alex, who is the prosthetist on the study, is really good. But I can't just leave it to him to say, yeah, I did the exact reductions and kind of was consistent in my philosophy from one subject to the next when we're doing 42 subjects through the study. And from that was born the idea and the concept for the TIG. It's kind of playing on an idea that I had when I was in grad school for calibrating force plates and using kind of a simple spring-loaded rod to quantify the force and and essentially made a handheld drometer gauge.
SPEAKER_02But first, one thing I think I think we don't see, I think, enough applied research really going on at OMP. I think a lot of people are reading this like, oh, the defense funds a clinical trial. Sounds like fun. Sounds like something I could do or I want to do. Talk us a little bit. If if I'm a company that wants to do this, I mean, what do I need to do? I mean, I mean, how many times do I need to devote to some how many, how many years or time time do I have to devote to this? How many people do I need for something like that? And what does my mentality have to be to do something like this? Because we would love to see more work like this being done, but it's it's not it's definitely not easy, right?
SPEAKER_00No, it it's not, but I I think the field has been moving in this direction over the last several years. You know, I think the when I first joined the industry, the the rack audits and things were going on. And since that time, I think outcomes have become more of a focus. I think there's been more intention with the design and trying to understand what type of patient presentation responds best to what type of technology. So I definitely see there a growing trend here, and it's exciting to see just because I think at the end of the day, care is is improving and patients are getting more value for their care because of that. In terms of what you need to get going, uh, I think really that just comes down to have an idea and and the tenacity to keep chasing it. There there will definitely be setbacks along the way, but you just need to keep persevering and find your way through to eventually you uh can can conduct the research and and make the translation to the clinic that you're you're looking to do.
SPEAKER_02Okay. And then yeah, talk to us about this device you guys invented.
Blending Measurements With AI
SPEAKER_02What was but you know, did you want to like because it's basically more than a device, right? It's like it's it's more like a whole measurement solution. Let's say did you first just want a device and did it kind of blunder into a solution, or what was what was the thinking there?
SPEAKER_00Aaron Powell No, we we thought that it had potential. It definitely had the the roots of a way to control this device. But as we got going into this, it it was proven out to be really effective. And I made a mental note, you know, to the team really to go back and look. And at the end of the study, you know, we had made all these sockets for all these people, two different conditions. They were at it where it for each one for months at a time. So, you know, just the 38 subjects that finished, that's 76 sockets that we made using this kind of data-driven workflow. And we went back and looked, and at the end of that, 74 of the 76 matched the design, the pressure distribution that was in CAD was what was delivered as the definitive socket, which I don't know, I don't have good evidence of what that normally is, but it's not that. It's it's much more that you're having to take a heat gun and flex out an area or push it in or glue a pad in. So that got us really excited. And you're right, it's more than just this measurement. And and, you know, one of your past episodes, I believe it was with uh Maurice Johnson from Floyd Brace and Limb. You guys were talking, uh, I think it might have been right after the show, you guys were kind of spitballing with each other. And Brent, I think maybe you made the comment about it'd be really cool to see kind of the physical measurements blended with some type of AI. And I'm sitting there listening to the episode because I do listen to you guys' show regularly, and I'm getting excited. It's like, man, this is the idea I've been wanting to talk to Brent about for a long time. Because I think it fits that need, right? So it's not just a device that can quantify what the clinician's already doing with their hands, right? You're already palpating and feeling where is it hard, where's it soft. You know you want to apply pressures generally where it's it's softer and relieve where it's harder, but this just gives you that quantification of what you're doing with your hands that can be fed into a digital workflow. So we are in the process of revamping our omega system and that should be coming out really soon, and we're really excited about it. Some people got to see it at AOPA a couple of weeks ago. Um, but this works in. There's a there's a bit of AI to kind of help locate based on a few real simple bits of information that we're getting from the patient and kind of helping map out where the sites that we're collecting this TIG data, you know, on the limb is in the digital world. And then from that, you kind of verify the placement, the TIG data gets populated into those sites. And based on this limb health study that we have and all the outcomes and how to distribute the pressure based on the actual presentation of your limb, it then can make an initial socket recommendation that the clinician can verify or further personalize to their liking.
SPEAKER_02Okay. And then where do I is it is it that it's gonna be more comfortable? Is it gonna be quicker to get to more comfortable, or is it gonna be healthier? What's the the the the real advantage day-to-day for the patient and and using this?
SPEAKER_00We we see all the above. So we we expect there to be comfort. You know, most recently we fit a wounded warrior outside of the study, but using the the TIG and data-driven workflow. And I was with chatting with him in a group, and you know, he's he's saying it's the most comfortable socket he's ever had fit on him. And he's been an amputee since 1996, I believe. That's not the only comment we've heard of that. But I also think it will be healthier on the tissues just because we have the scientific evidence supporting some of the decisions that are made based on the presentation of stiffness. But then also the clinical efficiency, less disruptions, less back and forth to the clinic for the patient, more time for the practitioner to work with that patient on other things, whether it be gay training or working on a device for some other aspect of their daily lives. I think there's a number of ways that this can impact the clinic positively.
SPEAKER_02Okay, okay. And then, you know, how am I gonna buy this thing? I mean, I think it's really early days for you guys. I mean, you may not have a price or something, but the idea is like it's a purchase price, I buy it, I have a subscription. How's it gonna work kind of generally? I think. What can you tell us now?
SPEAKER_00Yeah, we we're definitely still working through that. Uh, hope to have something sorted out soon, but we're mindful of you know constraints in the field and we we understand that this is something that can positively impact that. So we're trying to weigh all this decision and make sure that it provides value, is accessible to to everybody. And you know, hopefully I can have that update to you here in the near future.
SPEAKER_02But but and and you know, and how am I gonna interpret this information? Is it only through your software? Could I use it without your software? Like, because a lot of people are are flying by kind of ear or some feeling or some built-up kind of sensitivity, I guess, you know. So, you know, I'm gonna be reading this in the software. How am I gonna be able to take that through, I don't know, my CAD software if I'm gonna make a 3D printing port, or how am I gonna make that, you know, how's I'm gonna translate that to the real world?
SPEAKER_00Yeah. Initially, I think everything will run through kind of the new Omega platform. It just will have all the tools you need. It'll, you know, help house the model. Uh it help just ensure that we have a a bit of control around that in terms of the data workflow getting up to the socket design. From there, you know, you could send that to 3D Print the Socket if that's what you want, kind of build your negative from the positive. You can go a traditional manufacturing route, whether you're doing that in-house, you're sending it to a central fabrication house, whatever your preferences are from there. I don't really see any limitations in that regard.
Adoption Hurdles And Payer Evidence
SPEAKER_01So one of the things that I find fascinating, and you've been working on this for a long time. So it it probably hasn't been all roses and butterflies and that sort of thing. There's also, and and probably not from the engineering side, but just trying to get people like me, clinicians, right, that uh have a hard head on board. What would you say some of the challenges is have been? And then and then light bulb moments for people like me, like a clinician, like and then you see some connecting of the dots.
SPEAKER_00Yeah, I I think you know, obviously, getting the tool to work and be accurate. That that's that was just a fun engineering challenge, right? Just getting it ever better, ever more accurate. There, there was a lot of iterations. I think we're on the fourth iteration of it now, and that you know, within that there's a few minor tweaks, I wouldn't call a major overhaul of the design. But you know, we've been at it for a while, so we've really got that honed in. In terms of adoption with with the clinicians, you know, I I think just giving it a chance and trialing it, I think you'll be impressed. I think you'll view it as an enhancement to what you are currently doing, more information that allows you to act. I think in time there'll be a realization of the added information that's only gonna help with medical necessity justification and being able to present evidence, quantitative evidence to payers in time. And that's gonna help just make the decision more clear and more evident of why it's needed. And so I think those are some of the opportunities that we have in front of us.
SPEAKER_01So with the integration of Willow Wood's software, I mean, that's been around for a while and probably uh needed a refresh anyway. So it's a perfect time to do that. What role have you seen AI help kind of even decision trees, process information, things of that nature that has helped accelerate your kind of program, so to speak, or your your research?
SPEAKER_00Sure. Yeah, I think it will be somewhat present in the in the final solution, just helping to more quickly identify where the regions are on the scanned shape, as opposed to having to do that manually. So I think there'll be a time savings aspect to the clinicians then the the tig data gets populated in. Of course, you know, it could it AI is useful in in some ways and just use re used uh correctly and and kind of responsibly just to help as you're working through code and that kind of stuff, uh just getting you quick quicker iterations on on that. But yeah, I what I what I do appreciate is kind of what you touched on in the previous uh episode that I referenced earlier is is just bringing the physical measurements into an AI model just so it's not purely based on on a template or you know, a set better of uh set a set based of rules, but actually using information specific to that individual to then make some recommendations.
SPEAKER_02Yeah. I think I think that's a really interesting approach. And I think if we look a little bit uh, you know, yeah, are there a particular indication where you think this is going to be used a lot more? I mean, socket seems obvious. Do you think it'll go way beyond that? Or is it just a like a basically socket-only type of tool? Do you think it's like a specialized thing, or is it just like a it's like 3D scanning? You can apply it to a ton of different stuff.
SPEAKER_00I I think you can apply it to a lot of different areas. Uh obviously sockets is one that was near and dear to our interests being in the prosthetics industry for, you know, well over a hundred years at this point. But I could see quick expansion into other areas where an assistive device is mating with the human body. So whether that's orthoses, exoskeletons, wheelchair seating, you'll be able to get really accurate data about your patient's presentation, wherever that device or garment is going to be interfacing with and figure out how to best distribute it to protect their health, protect their comfort, make them more functional. And there could be it could also impact the other side of the interface, right? In terms of how lineers are made and designed, et cetera. So there's a lot of possibilities that this could span into. And this is just the first, the first thrust into the commercial space.
SPEAKER_02Okay, that's good. And then uh let's well, uh are you are you guys working on
Beyond Sockets Monitoring And Auto Adjustment
SPEAKER_02other stuff? Has this been just the entire focus of your existence so far? Is there any stuff other stuff you're working on in Willowwood at the moment as well?
SPEAKER_00Well, we're working on all sorts of stuff, yours. So it's it we're it's a really exciting time at Willowwood. This this product is kind of the first, I kind of referenced it in the talk at AOPA, but you know, once you kind of define or give a good starting point of what this is, you know, the logical next thing that you'd want to do is, okay, if we know this is better for limb health, let's track what's changing over time. And then if you could track what's changing over time, you could then create automatic adjustment systems. And this is just what we're working on focused at the interface. So we we have thrust in each of those buckets. So not only we are, you know, with this data-driven workflow, establishing a really good fit up front, we'll have technologies that'll help you monitor changes to that fit, whether that's alerting the patient or feeding into some type of closed-loop controller for an automatic adjusting socket or interface system, right, where you can maintain that comfort and protect that limb health over the whole course of that useful life, that prosthesis. And then, you know, beyond the interface, there's other technologies that we're working on that we're really excited about. Uh and you know, we've come up with some other innovating ideas, you know, most recently, kind of the Metaflow, the first sixty-eight foot. So that's the code for active dorsiflexion, but we're the first to have no hydraulics to achieve that code for K3 ambulators. So that was a really exciting. Writing has been a great product for patients and really positive feedback from the field on that one as well.
SPEAKER_02That's cool. And we're talking about it with your colleague as well, but I want to bring it up again. So you guys have been making these wooden sockets for a long time. How about bringing back those wooden classic kind of for the hipsters in the world? It's kind of really classic, nobly made wooden sockets to really celebrate the history of the firm.
SPEAKER_00Yeah, you know, this this came up real fast, but we wanted to make a wooden replica or functional wooden uh uh uh Tig just for you, yours. So maybe we'll have to come back with a little bit more time. But you're you you're I'm not opposed to that.
SPEAKER_02I don't well uh you know, uh knock on wood, uh I don't need that kind of stuff now. So that's that's that's one thing I'm happy. I love doing this this podcast and stuff like that, but I'm not uh that experienced in that sense. I hope I don't have to do that, I think. I'm not as strong as always these people, the patients we get on here. I'm always like, what do I have to go run triathlons too? I'm like, no, no, no. You know, I'm lazy enough as it is, you know. Uh so uh and another thing, I think if we're just looking at more broadly in in in innovation is market, like there's always kind of this broader kind of, you know, how are you gonna tell me to do my job kind of thing? This kind of artisanness, and then there's like kind of a and we know this is well an additive as well, where people are just like kind of like a little bit scared of it or just like afraid of kind of being replaced or their key skill being replaced. You know, how do you do that? How do you kind of offer them new tools without kind of taking away that artisanship, but then again, at the same time kind of making them more accurate, you know?
SPEAKER_00Absolutely. It's definitely been a uh something on top of mind for us as we you know finalize out this data-driven workflow, you know, making sure the clinician and even the patient, there there's points throughout where their input is is vital to this. It's not a replacement of, it's an enhancement to those individuals. And I think we've seen this in other areas of medicine as well. Uh you know, there's several examples in dentistry and and even ophthalmology, right? So if you go to the eye doctor back in the day, they used to shine the light in your eye, and the doctor's looking through the light and seeing how your eye is responding to that stimulus. Then comes the, then after he makes his initial assessment based on his experience, you go through trial framing where he's like, which lens is better, this one or this one. Then comes the invention of the autorefractor. So you now look into the machine. It's doing the same thing the clinician used to be doing, but now giving a more objective approach and feeding that to the clinician, and you get a more efficient trial framing process and reaching your prescription faster. I think it's a very similar analogy here is it's not a replacement too. It's an enhancement of the clinician's skills, giving them more information so they can make actionable decisions that lead to really good care and really efficient care.
SPEAKER_01I'm just wondering, like your perspective as an engineer, uh, you know, and I know you've been involved with the O and P industry quite a bit, and I and that's why I appreciate yours, you bringing up the artisanship, artisan aspect of it. Um I I feel like we are moving more in a in a data-driven way while keeping an artisan history. But I I'd I'd just love for you, Matt, as an engineer coming in and then seeing some of the stuff that we did that we didn't necessarily measure. What were your thoughts coming in? Like, hey, we got to fix this, or did you have like a little bit of a tick, like you you really didn't take a measurement, or how much are you taking off? That that sort of thing. Because that's been my experience over the years, too, is I was very much the hands-on person doing all this, and then I'm like, maybe this data stuff, there's something to it.
SPEAKER_00Yeah, you know, it's interesting when you enter the field and you you're interacting more regularly with clinicians and you know, just thinking some of the initial projects that I was working on at Willowwood were socket in nature, and you know, at at times they're talking percent changes, then it's all of a sudden it flips to it's a certain apply reduction, and then you're starting to ask, well, what's a what does apply mean? So it's kind of a learning curve to to that and some of the language and and terms that are used. And I don't think I'm still not sure that apply to you is the same thing that apply to me is, but it's been interesting to kind of depends on where you want to apply that.
SPEAKER_02Yeah. We might have to edit that out. Yeah, your all use as well to all our listeners. I'm sorry about that. We'll just axe that one right there. No, no, but but go on, go on.
SPEAKER_00No, absolutely. It it's been really awesome to kind of learn and and appreciate the skill that that goes into treating patients and the and the techniques, but that doesn't you know, as an engineer and someone that likes to innovate, and I I think a lot of I do I do believe a lot of people in this space feel this is the you can't just stop innovating. There's always I kind of always had the mentality in sports and and in life, you know, even if you do something the best you've ever done, it's okay, how can we uh how can we make it even better? And I think that, you know, striving to always find find the solution that that just improves it, even if it's just a little bit, right? Just a little bit better every day. I get attracted to that kind of stuff. I think it makes care better. And I I think that's where data is heading, is just getting us that little bit better, a little bit better at a time. And and eventually someone, you know, you what we've done, I think someone else can come along and and build a build on top of that and find a way to make it further better still. And that that's really exciting, right? To to just to keep evolving and making that feel better and transforming it and and and improving the lives of patients.
SPEAKER_02Yeah, thanks for that reply, Matt. That's a really good uh way to kind of like applying your trade and applying that technology to supply the patient with the best, you know, deeply felt ample solution
How WillowWood Uses 3D Printing
SPEAKER_02there. But um so uh so so like I I have a question about like like just just if you're talking about Willy, well, let's talk a little bit because we haven't really mentioned 3D printing much. So, so so you know, to develop something like this, did you use 3D printing at all? Do you use 3D printing in your work or is it kind of very distant from what you're doing?
SPEAKER_00We do that right now the what we refer to as the TIG is 3D printed. Um yeah, we'll we'll see if it stays like that. We do have other products like our alpha control liner. The lock for that is 3D printed. We use 3D printing in our plant quite a bit, whether that's you know, creating shrouds or something like that just to protect workers from hot equipment or helping accelerate various prototyping phases. It's there. We have capabilities at at Willowwood, both in our Ohio and Arizona locations. So yeah, we're not shy to it. And I think it's definitely gonna make it's already having the impact, right, and and doing things that traditionally we have not been able to do. So it's it's definitely here to stay. It's gonna be more utilized. That's that's my viewpoint on it.
SPEAKER_02Well that's cool. Any any kind of can you tell us anything about the printers you're using or the technologies you're using?
SPEAKER_00Yeah, we've we we've used, we have uh bamboo printer uh that we do it mostly just to print and kind of see, because you know when you're looking at SOLIDWORKS and you have a big monitor, sometimes what's really small can look really big on the screen. So it's nice to kind of get a reality trek and just look at something physical rather quickly. We have some forum lab printers that are really useful in our prototyping phase. We used to have an old SLS printer, but the the maintenance on that kind of became more than than we wanted to deal with. And so that that was donated to a university. And uh yeah, we have we have some other just large format FDM printers that that we use for for various things.
SPEAKER_01They don't use advanced 3D for any of their printing. Just thought I just thought I'd throw that out there. But go yet.
SPEAKER_00Yes. Okay, yeah. Hey, hey. There it is.
SPEAKER_02No, and uh so that that's really exciting. I like the worker shrouds idea. I think I think a lot of people just like when you get started. We talked about this before, jigs, fixtures, you know, organization of your lab, using kind of like little boards to put your tools on. That kind of stuff is a great way to get started. And the ROI on something like worker safety, somebody doesn't get burnt or something by a welding thing or something like that. That is like the ROI on that is huge. And it's it's also a really easy way to get started and show the technology, right?
SPEAKER_00Absolutely. Absolutely. Yeah, you mentioned the organization. That's funny. My several guys on my team, you can go into their office, and most of the things that are hanging tools up on the wall are all 3D printed. So that's definitely a useful application.
SPEAKER_02Yeah, no, I I think tool organization is really overlooked by people, and but just you know, just you know, not finding that 14 uh or that one wrench or that one uh ratchet and making sure that nobody like takes it or puts it somewhere else or something like that, and just having access to it, that's it's really difficult to quantify. You could, you could do time studies, I guess. You could quantify that, but but uh you know, I think it's just a huge impact with relatively little work. And rather than having a patient crash down or something, you have a ratchet that falls to the floor if you do it wrong. So it's a it's a great way to get started, I think.
Closing Thoughts On Industry Evolution
SPEAKER_02So Matt, thank you so much for being with us today. I thought it was really great uh to learn more about Willowwood and what you guys are doing. This tick think sounds like it could really help the digitization of OMP and uh in a kind of really helpful way for the patient and the practitioner. So so thanks for you guys for for doing that. It sounds really exciting.
SPEAKER_00Yeah, absolutely uh, you know, thank you for the opportunity. It's been been fun and look forward to continuing to listen to you guys. Awesome. Thanks for that as well.
SPEAKER_02And Brent, thank you for being here also.
SPEAKER_01Yeah, this was this is great. And uh, you know, I think one thing that I I appreciate about what Matt's doing and what Willowwood's doing is I mean, we've mentioned that they've been around for a long, long time. And I think we don't say enough about what they're doing and what they're innovating, and maybe some of that's on the their side and the marketing side just because it just doesn't come through or pass our desk. But it's really cool when we start looking into it and we see what they're doing and to go from willowwood, you know, wood stuff now into the digital space where we're making things for clinicians to make sockets better. I mean, how cool of an evolution is that? I think that's uh that's pretty neat. So I would say to our listeners, you know, don't sleep on uh willowwood. It seems like they're really doing some cool things.
SPEAKER_02Awesome. And thank you very much for listening to another episode of the the the Prostetics and Orthodox Podcast. Have a great day. You wanna you want to do that one again? D dude close it out again. Thank you very much for listening to the Prestetics and Orthodox podcast. Have a great day. There we go. All right, hang tight. That was okay. That was good.