Precipice
Stories of landslides and community restoration in Muriwai New Zealand following the devastating 13 February 2023 Cyclone Gabrielle.
Instagram @precipicepodcastnz
Precipice
A Commemorative Sculpture: Community Initiatives after a Traumatic Weather Event. Ep 21 Precipice Podcast.
Use Left/Right to seek, Home/End to jump to start or end. Hold shift to jump forward or backward.
In this episode I talk to Aotearoa NZ artist Jeff Thomson, who was commissioned by the community to create a cyclone gabrielle commemorative public sculpture for Muriwai.
We talk about considerations made by Jeff and his team when designing and building the sculpture such as intention, audience, location and design development as well as lighting, placement, materials and scale.
Jeff shares the challenges and highlights of the project, the community response . We discuss the building consent process, the naming, blessing, hikoi and official opening and the importance of working with local iwi as well as collaboratively with the local community.
Precipice launched on July 20th 2026. 3 seasons will be released across 4 weeks and then the full series of 26 episodes will be available for you to listen to at your leisure.
Season 1: Cyclone Gabrielle Hits Muriwai
Season 2: Disaster Recovery and Community Restoration
Season 3: Community Initiatives after a Cyclone
Listen on You Tube https://www.youtube.com/@precipicepodcast
Follow on Instagram https://www.instagram.com/precipicepodcast
Hosted and produced by Mandy Jakich. Commissioned and funded by Muriwai Community Association, supported by the Auckland Council Recovery Office.
This podcast captures what happened on the night and in the days, months, and years that followed. Join me, Mandy Yakit, as I speak to fellow Muturawai locals, volunteers, and those involved in the emergency and recovery effort. Hear about their experiences of lost and upheaval, the impact on their lives, and the community-led initiatives that helped Muduay find a way forward. Welcome to Principal. In this episode, I talked to Al Talala New Zealand artist Jeff Thompson. Jeff was commissioned by the community to create a Cyclone Gabrielle commemorative public sculpture for Muriwai. We talk about considerations made by Jeff and his team when designing and building the sculpture, such as intention, audience, location and design development, as well as lighting, placement, materials, and scale.
SPEAKER_00It's not often you can do a public sculpture where you can build it and as you're not you're not held to an actual design or a marquette. So it was like an open canvas, and that was wonderful to be able to do that.
MandyJeff shares some of the challenges of the project, and we talk about some of the highlights and the community response.
SPEAKER_00I did have people come in and tear up looking at it when they saw some of the materials from their properties that they recognized.
MandyWe discuss the building consent process, the naming blessing, HIKOI, and official opening, and the importance of working with local eWi as well as collaboratively with the local community.
SPEAKER_00Bring a community together, being creative, I think is a wonderful way to achieve that and get behind it and and work as a team. My name's Jeff Thompson and I'm a sculptor up living up in Helensville, and I've been a full-time sculptor since 1985-86, so it's been a while now. And predominantly I work with that very familiar material, corrugated iron, but I do a lot of other stuff with other materials, mostly recycled or found materials.
MandyHow did the opportunity to build a commemorative sculpture for Murawai actually come about?
SPEAKER_00I was actually approached by Maria Koppens, who years and years before for Maria and her partner Abe, I had made them a a sculpture based off natural forms of ni cow and plant forms from around their property in Murawai. And she obviously remembered me, they knew I worked with found materials, so they approached me about the possibility of was I interested in being involved with a group of locals in designing and building a sculpture as a commemorative um sculpture and remembering what had happened during or in Cyclone Gabriel. And of course I said yes straight away. I came and had a look at the damage done from you know I was being an outsider, I was quite nervous as well because I wasn't really didn't feel a part of this community, even though I'd exhibited with the Muraway arts, artists, and art trials for a number of years. So I did know a lot of people here and had done quite a few commissions, but it was quite nerve-wracking because this was a bit of a major event, and I felt there was a lot of responsibility to try and make it work. So I made some designs, models, and we had a meeting. I took along five ideas. One of them was a building structure which was made using materials from a whole lot of the buildings that had been read, the houses had been read, stickered. Another one was making a series of abstract pose or columns, again using materials from the different properties. And immediately that was the unanimous decision, that was the one that was chosen, that was the one that people liked. And it was something that you could walk in amongst it, um, around it. Look, it was each of these columns up to three metres high, about eighty centimetres square, and uh so you could walk amongst them and and and explore and find hidden things in there. So that that's how it came about. What was the purpose of the sculpture, do you think? The purpose at the time I think it was not so much a a um memorial, more of a commemorative. It was somewhere where people who had lost their houses could could go and reflect. Um that's how I saw it. And and the wider community, of course.
MandyAnd it is placed just opposite the cafe down at the beach, which is not operating at the moment, um, on a really nice little baby reserve, part of Council Land, which is a really lovely spot for it. It's a nice place for people to have a picnic and and have a look at the sculpture. How did you come up with the best location?
SPEAKER_00At meetings w there was four or five different sites put forward, and one by one they were knocked off because one was in one was flooding, um was in flooding, one was gonna be difficult because it was um oh there were diff there were difficulties, and one by one they were sort of knocked off the list until this was the final one that was thought was gonna be great. So um Maria was like a a a ball of energy um leading the group, which involved other artists and and just members of the community. And um of course the council um were quite supportive and me, not financially, but they were supportive and tried to help the community as much as they could. So they they agreed, I think, pretty quickly that they we could use that site.
MandyAs you said, you sourced materials from the houses that were going to be deconstructed. Could you talk us through that process, Jeff?
SPEAKER_00Working with Trow Group, um, who were the ri uh the official had the contract to demolish the houses. Uh working with them, I started I was able to go and look at properties, they would tell me which houses were being demolished, and I would go in beforehand and look and take photographs. So it meant it meant actually going inside, and that was really strange for me because some of these houses were perfect. There was, you know, there wasn't they weren't squashed or yeah, they were they were quite new and modern, um, yet they were going to be demolished. So I'd go through and have a look and take photographs, but mainly my interest was on the outside of the buildings and in the gardens because being outdoors, the sculpture was going to be outdoors, a lot of the materials from inside were not going to survive long term. So I started looking at things like weatherboards, um uh decking, railings, bricks, concrete blocks, roofing, uh, that sort of thing. Um, and materials that were gonna last like sinks as well, sinks and kitchenware, mosaics, kitchen tiles, that sort of stuff that would survive. So I'd take photographs, provide them, give them to um Trowel Group, and then they would pass on the images and the list to the the teams that were demolishing. There was usually at least two different teams from Trowel demolishing at any given time, and they would put them aside for me, but I'd you know you'd probably only get about 50% or less of what you actually wanted. So there were times I would actually go on after hours and just, you know, there was something I wanted. I was very careful, of course, but I'd just go and get what I wanted. It was probably a quicker way of doing it.
MandyWhat was the process for contacting the families who owned the homes that you were going to take the materials from and how did you obtain permission?
SPEAKER_00Maria organised all of that.
MandyThat's Maria Coppins, who I also speak to on the podcast.
SPEAKER_00And I think of the original 69 houses, I think there's there was more than that now that originally were get were red stickered, um, there was only two I think early on there was only one family um stated they didn't want materials from their house or property used in the sculpture, which was fine. That was that was you know their prerogative, that was okay. Um and then over time there was one more household who said no. But otherwise, I think they all agreed or sp spoke to Maria and said that they would be more than happy to have materials from the houses used in the sculpture.
MandyAnd some of the house some of the the houses you used letterboxes and numbers. Did the people who own the houses have any say in what they'd like use at all?
SPEAKER_00No. I was given materials by people. Um but they were open to me just to use whatever. And of course numbers and letterboxes was down my alley because I'd done a lot of work with letterboxes, but they also became a symbol of the of the properties. We've I think I've only used about 20 uh numbers and parts of mailboxes. I'd often have to because because the sculpture is sort of shallow relief and relief on the attaching screwing and um using Siliflex to attach materials, uh I would often cut things down. So I did alter things, they're still this materials from the properties, but I would often not use them exactly as they had been used on the property itself, so I would cut so they would fit and almost lock in in places like a jigsaw puzzle. And I tried to combine things like there's one panel where I cut up probably from about 15 different roof profile, mainly corrugated iron on the on one of the panels. So I chopped it into strips and wove the roofing materials together from those 15-20 houses into a panel. So I was doing things like that. I've used bricks from about 40, 40 properties, um, and and again cut them up and attached them to panels and tire same with tiles, so so it was very much left up to me as to do it. How to do it. And I remember the very first when I made some mock-ups in my studio before anyone had seen them, I was quite nervous as to the response, but the response was incredibly positive. So um I then I realized that I was sort of on the right track and a lot of it was aesthetics too, building and putting materials together that that worked together. And the nice thing about it, I had never heard of it before, but because I was building it as we went, it's not often you can do a public sculpture where you can build it and as you're not you're not held to an actual design or a marquette. Uh so it was like an open canvas, and that was wonderful to be able to do that.
MandyIt's very much based on the materials, that's what sort of came out of it.
SPEAKER_00It was well, I'm a materials guy. Yeah. So it was very much material it was very much about materials, working with materials and being sympathetic to the materials. Yeah. Yeah, and as and of course as you do wander through them, you do discover different things. One of the columns is made entirely of mosaics. So m the tiles came from they they came, people brought them with them, and we had these weekly workshops on a Saturday for a couple of hours in the morning, and it was hugely successful, and the number the number of people that were actually involved in doing that, and I'm no expert with with mosaics, so so locals who were came in and ran the workshops.
MandyErin Griffin and Josh Hong were part of the Mosaic Workshop organization and talk about these workshops on the podcast.
SPEAKER_00And my job was to use them afterwards and and arrange them on one of the columns. So the entire column, all four sides, right from the ground up to the top, is mosaic. And I was I was always a little bit unsure about it, but for me now it's one of the most successful of the columns. You know, it's quite beautiful.
MandyAnd so nice to have that collaborative aspect. But those um those workshops are really good for kind of fam whole families to come and and this was part of the sort of processing of what had happened.
SPEAKER_00Yep, there was whole families coming in children through to grandparents. Um, some had lost houses, some were just you know from the community itself. So it really, you know, it it was it really was a com a really successful community event. People like to be involved and feel as though they've done something. And I do know people go and look at the columns and they see what they've done on there.
MandyLocal artist Meta Hay also contributed to this sculpture and she talks about this process and her work on the podcast as well.
SPEAKER_00On the day that panel was going up, I mounted them about or an hour beforehand, just was very spontaneous. Um Meta, I think, was away at the time, so I had to just make some decisions and just just sort of threw them on and screwed them on.
MandyThey look great. Yeah. So it was really collaborative in lots of ways, you know, right from the sort of committee that was formed to support you to get the project done. Can you talk us through maybe the um the structural side of it and what had to happen before you actually created the sculpture?
SPEAKER_00I originally I made these little wooden models, columns, uh, and then it was passed on to a couple of local builders. So there was a couple of local builders volunteered their time and and actually made they built the internal structures for these columns, Peter Haven, Peter Haven uh construction, and and Brett Hardy, and they were absolutely fantastic. There were a couple of times when the surf was up when one or one of them may not appear. I couldn't thank them enough for the physical work and organization that they actually did. Because it's sand, the ground is all sand, uh, we had to put these they put these big columns, timber columns, big posts deep into the ground, really deep. So another local came along and they dug the holes and we had to get cardboard sleeves, construction sleeves, and put them in the ground first, and then the piles went into that with concrete. And then they built around that with um with treated timber and stuff so that I could then bring my 16 or 18 mil thick panels, plywood treated panels onto those onto those frameworks. The underground earthworks were quite phenomenal.
MandyAnd did you have to go through council to get sort of approval or get that all checked off?
SPEAKER_00Yes, they had to be all approved by uh uh engineering company, and there was no problems whatsoever. They they were you know on board and the council was on board with everything like that. So that all came through. The final it did come through quite late, getting the final consent. We were getting ready to build and stuff, so that was a little bit nerve-wracking. I made some cardboard rectangular um or pieces of cut-out cardboard, placed them on the ground where I thought these structures should be, and then another local with a um a drone sent up with a camera about a hundred metres up in the air and photographed them for above so that we could, you know, then they could go in with the building consent. So that was interesting as well, and just had to make some decisions and and that was it. You know, we're members of the community. I don't think anyone was paid, probably apart from me from from and getting all the materials and things. So it was it was really was an incredible community experience.
MandyYeah. And as an artist, do you think that could have happened without having that sort of community committee supporting you and sort of getting stuff done so you could actually get on with it and do it?
SPEAKER_00I don't think so. If I'm left to myself, I'll drag my heel or or you know, um but when you've when you've got a group and it it was a really powerful group and everyone had their roles and emails were flying back and forth. There's hundreds and hundreds of emails discussing, you know, all the different things. And uh but w without that um it would have been a much slower process.
MandyAnd what were some of the challenges you came up against through the process?
SPEAKER_00The biggest the biggest challenge I think was overcoming for me personally. You know, I know why I was asked to do it, but I I felt a I still felt a little bit like an imposter. Yeah. Felt a little bit like an imposter doing it and especially going into these houses of people I didn't know. Um Yeah.
MandySo for me it did become very much about the materials because I could not um you know, I wasn't part of the community like that, so I think it was probably a good thing in a way, but I mean you're not you don't live far away and you're very much a part of the artistic community. And I think it might have been too close for somebody actually in the community who knew the people who had the home, so you probably actually were the perfect choice.
SPEAKER_00Possibly. There are certainly people here who could have, you know, made a sculpture and stuff. Um I had had a lot of experience building public sculptures, so I suppose that was one advantage working in public, but for as I said, for me it wasn't a difficulty, but the highlight was being able to build it as I went. So in term in terms of the time thing, that was that was a bit of difficult just making sure that everything was done on time. I'm s it's still not finished. It's almost finished. There's still there's still a few houses out there which are being moved. There might be one still to be demolished. Um so I'm still been getting materials and I've got two panels left as at the date today. Yeah, so yeah, so probably the time thing was possibly my biggest problem. And the and the the nervousness beforehand before we started getting, you know, all of a sudden just working with people I didn't know at the time, no, trying to get things done, but I didn't just realise how positive you know, I'm used to doing things myself, but to have this group of people, especially the builders and their helpers, what what they did I couldn't have done.
MandyAnd did you come up against any sort of negative reaction to the sculpture?
SPEAKER_00Only after I'd finished it, and it was only once. Once. And it was um it was a it was a local who who didn't want to remember the event no one to move on. It wasn't it wasn't entirely a totally never negative experience, but it was my first experience of someone who who wasn't overly positive. I did have people come in and and you know, m tear up looking at it when they saw some of the materials from their properties that they recognized. People came down and talked who had lost houses and things, but uh yeah, that was the only one experience and it it wasn't a bad experience, it just I hadn't thought of it like that. I hadn't because I'd had such positiveness to have someone say that they didn't want it.
MandyBut I think it's a lovely place for people to come and just, you know, remember and reflect. Or have a cry or whatever they need. Yeah. And then it was quite a big process um once you'd sort of nearly finished it, or once you were ready to present it to the public, going through the blessing and then also a big sort of public gathering where we sort of had a big hicoi down from the surf club to the sculpture. Can you tell us about that process and what was organized and how it all went?
SPEAKER_00Well it was um Richard Nahi who did the blessing. He was fantastic, and I approached him because I'd I'd been involved with another project where I'd needed his advice and thoughts and things. It went incredibly smoothly. He took control, he was incredibly good at at the the blessing and um he made everyone feel very welcome. There was a probably a couple hundred people there. The Hecoy came from the surf club and we walked in silence. So it was probably a good three, four hundred metre walk, and it was Richard suggesting that we walk in silence so people could think think about what had happened. And uh we all arrived across the road in the old weather in the car park of the this the bottom store which is not there at the moment, not running, and then we were welcomed on and there was a number of speeches, there was politicians there from the government, local council, Auckland Council. It wasn't a solemn event, it was a it was sort of it wasn't joyous, but it wasn't solemn either. It was just a lot of people who really seemed to enjoy the sculpture, which was great for me. It was great for everyone involved.
unknownYeah.
MandyYeah, it really was. And Richard, it was he He worked for Auckland Council, is that right?
SPEAKER_00Richards Richards with Auckland Council Maori Maori Affairs Advisor. Richard also gave the name um of the sculpture, Pohihuri. And that was at a meeting I where I did a presentation and I showed a picture of the proposed sculpture and he said I know what to call it and he ran off and got his guitar and he came back and there was a song and it's the title of the song.
MandyWe actually sang the song as part of the blessing, didn't we? For We did. Yeah, which is probably not the best singing we've ever had, but uh was there anything else that you could recommend to other communities maybe doing a similar thing? Any suggestions or tips for making those connections with the Maori advisors or you know making sure that you do that part of the process correctly?
SPEAKER_00Firstly, community involvement. The more people involved in the community with all their different expertise, and I think it's just a given that you would approach the local Iwi and get their support, get their thoughts, get their input. Um and it just adds to the whole the whole event, it makes it feel important and makes people feel belonged. Mm-hmm. That they belong to it. It's part of it's part of the community. So I wouldn't hesitate to reach out to different parts of the community and including the Maori community.
MandyThe committee did talk about lighting up the sculpture so, you know, so it could be seen at night and it was more of a feature at night.
SPEAKER_00Look, yes, even at but even amongst the committee there was dis early on there was discussion, it was discussion about the effect of lighting, because you know, if you have upright the idea was to have well we discussed lighting coming from a pole or a lamp post or trees, you know, onto it. Um and also it was decided to have up up um up lighting as well as possibly lighting on the columns, bringing out light on some of the other columns. But eventually it was decided to flag the lighting even after the the uh the PVC piping was put in for the lighting, the electrician came and they put the holes and put it all in. It was decided not to not to use the lighting. It one of the one of the concerns was the effect lighting would have on nightlife, birds, insects. It was a con it was a concern.
MandyIs there anything else that you could say to other communities thinking about creating a sculpture like this, any other things that you learned or or things that you noticed along the way?
SPEAKER_00Having having a group of locals involved rather than one or two individuals and reaching out and and and getting ex people who are experienced with like the drone photography, digging the holes. Someone came down with their tractor and a a digger to dig the holes. Local builders, of course, um came and it was it was the main two, but they had helpers as well, block layers, because there's concrete blocks put down for some of the lower plints, because I made with a a brick piece, first time for me laying bricks was to make an a a a a seating piece which is lower to the ground. And it was for me, it was one of them for me it was probably my most successful piece there because it was pretty rugged and uneven, but loved doing it. So um but inside that there's concrete blocks, so a block layer came and did that. So it was just getting members of the community to chip in and help so people feel involved.
MandyAnd what do you think com um Mira the community of Murawai did really well?
SPEAKER_00I think the the community of Murawai firstly the working on the workshops was really successful. They did that really well. And there were times it was up to twenty people there on a Saturday morning working doing that. People helping other people finish things off. Uh basically the just the general support, those there was it was very well publicised. So you know, in the Gannett like even in Helensburg where I'm based, there was a woman working at MITA ten who's from Uruguay and she was always talking to me about it. She'd read this and seen that and so she knew all about it. So so the publicity side of it I think went really well. And um Yeah. We had interviews on on stuff and various newspapers and radio interviews and things. And that's not over because you know, there's there's things like art magazines who are possibly interested in in looking at it and so I'd say and people just taking photographs of it, so the publicity side will just go on and on and on.
MandyYeah, which is great. And then we can share what we went through as a community with people visiting. Because it is quite a it is an area that a lot of tourists come to.
SPEAKER_00So Oh look, I was I was just there last week when when three German tourists who were in the campground came over to have a look and they were there for a good half hour looking at it, talking about it, discussing it.
MandyAnd you are working on a plinth to describe, you know, what happened and and describe the making of the work, is that right?
SPEAKER_00I'm I'm making the plinth, um, which is which will be part of the sculpture because from one angle from the road it looks it's a very sharp edge going up, and I just think it needed something there to to balance it up a little bit. And so it was I I always thought it should have an extra column. So I'm making a small plinth, we're calling it a plinth, and there'll be signage on that, which has been um done by others. I think I think Marie and Abe were very involved with that, plus others in the committee. And there's a photograph of one of the slips as well, and that will go on to the plinth. So the plinth itself, I'm using concrete blocks again from basements and garages from different properties. So there'll be a variety of different it's not huge. And there's still what two sides I just need to finish off. One of them I'll be working on on front tomorrow in a couple of days' time. So we're almost there. But there's little things to take into consideration, you know, the angle of where the print is going, where the signage is going, so leaves don't land on it or water doesn't settle on it. Um it needs to be on an angle so people can read it at a certain height. Um because it's also considered a pla you know, people could still sit on it, you don't want people sitting on that part of the the writing and stuff, so I've got to make part of the print a bit more rugged so it doesn't encourage people to sit on it. So this this those sort of considerations have been all the way through. Health and safety. Um on on the different pieces itself. I've had to grind back some of the bricks so that there's there's not sharp, nasty edges. The corrugated iron I've had to have up high and put put um edging on one of the columns, which is mainly very simple, but it's for me it's one of the more beautiful ones. It's just just sections of corrugated iron again from a number of houses, and uh or colour most of it's colour steel um being close to the sea. So the the corrugated iron of course rusts pretty quick with the salt. Colour steel of a certain grade lasts a lot longer. So there was a lot of colour steel used, and one of the columns is predominantly that, but I've had to use edgings and things to make that safe. Little things like that.
MandyDid you have someone checking that kind of thing, or was that just for what you know about these things?
SPEAKER_00I don't think anyone's checked it to my knowledge.
MandyHow did you work out how high the highest one was going to be?
SPEAKER_00Uh what I did I originally I made a mock-up of a column and I brought it down and and we all went there, the whole committee and a few extras, we went there and I placed it there, and uh from that we got a good idea we wanted to make it a bit higher, should have been a bit higher. So we worked out most of them are between 2.8 and 3 meters high. Uh and of course the ones in front look bigger than the ones in the back. Some are closer together than others. They're they're at different angles to each other. So um for v variety. So um the heights came basically from that very first first meeting where I took the model down there to have a look at.
MandyAnd I guess, you know, just the location. You had the location, but where you actually place it within that was quite important.
SPEAKER_00And and I found that quite difficult. Um and I think I if I remember I others you know, I I placed the cardboard where I thought they should go, and I think Abe may have been there at the time, or or Maria and a couple of others, and we moved them around a little bit, and that was it. So, well that's roughly where we we needed to basically position them for building consent.
MandyAnd then how did the build building consent process go?
SPEAKER_00Well, it went pretty we got it.
MandyYeah, yeah. And did you just put in did you have to write something up to it?
SPEAKER_00We had to write with my drawings, um of course the engineers then drew up one of the columns how it was going to be built, um, with the foundations, and that represented all of the columns. There's eight eight eight pieces in it. So there's eight eight individual pieces, nine when the print goes in, and so the engineers, the structural engineers did the drawings for one of them, and the rest were all the same, and that would have that went in with the building consent to get the permission, which happened pretty quick. That's where the council was supportive. They they um yeah. Pushed it through.
MandyIs there something hopeful or meaningful you'd like to leave us with, Jeff?
SPEAKER_00Oh look, I I think probably the main thing is to if something happens in the community or it it maybe nothing happens, but you want to um bring a community together. Being creative I think is a wonderful way to achieve that and get behind it and and work as a team. Work as a community.
MandyPrecipice was commissioned and funded by Mudawai Community Association, supported by the Auckland Council Recovery Office. Artwork by Tyler Williams, soundtrack by local Middawai Band Tin People, written in response to Titan Gabrielle. Namiji, thank you to the Middawai community for the input and bravery and for sharing their stories, and thank you for this.